finite element的例句大全

Combining the experimental tensile test and finite element simulation, the inverse method is carried out to identify the GTN damage parameters.

采用逆向方法，将单向拉伸试验与有限元数值模拟相结合来确定GTN模型损伤参数。

In this paper, the finite element method based on GTN model is used to investigate the ductile crack growth behavior in the three-point bending specimens of the dissimilar metal welded joint.

本文采用内嵌GTN损伤模型的有限元方法，建立了核电异种金属焊接接头三点弯曲试样的有限元模型，数值模拟延性裂纹的起裂和扩展行为。

In this paper, a large number of different materials are selected to do the small punch test. A deeply research was carried out about GTN model, equivalent stress and strain in finite element simulation of the small punch test.

本文在进行大量小冲杆试验的基础上，对小冲杆试验的有限元模拟中GTN模型及等效应力应变关系进行了深入的研究。

Based on rigid-plastic finite element method, backward extrusion process of TB10 titanium alloy cylinder was simulated numerically.

基于刚塑性有限元法，对TB10钛合金筒体反挤压过程进行数值模拟。

Analysis of superplastic deformation of backward extrusion by the rigid plastic finite element method

用刚塑性有限元法分析超塑性反挤压成形

With the Finite Element contact analysis method, this paper investigated the stress concentration of twin screws.

应用有限元接触分析方法, 研究了双螺杆辊式磨浆机螺杆的应力集中问题.

Distribution of removed material in Fluid Jet Polishing ( FJP) was investigated in experiments. The characteristics of fluid velocity and pressure on the sample surface were simulated using Finite Element Method ( FEM) when the fluid jet impacts the work piece.

实验研究了液体喷射抛光技术的材料去除量分布特征，并利用有限元分析方法，分析了抛光头（液体柱）与工件表面相互作用时流场的分布特点。

Based on the idea of the structure parametric design method, the parametric finite element model of drill chuck with complicated spiral surface character was established.

采用结构参数化设计方法建立了含有复杂螺旋曲面特征的钻夹头参数化有限元模型；

Finite Element Modeling and Strength Analysis for Key and Bevel Gear of Drill Chuck

论组织企业管理培训的关键因素钻夹头扳手锥齿轮有限元建模与强度分析

According to the original geometry size of EQB 140-20 crankshaft, according to certain condition of simplifying, the finite element network has been used to set up the crankshaft formats models.

根据EQB140-20曲轴的原始几何尺寸，依据一定的简化条件，建立了曲轴的有限元网格化模型。

The Finite Element Analysis for EBZ 160 Roadheader Expansion Internal Cutting Arm

EBZ160型掘进机内伸缩截割臂有限元分析研究

We apply here the second-order finite element method to the boundary-value problem of waveguides filled with inhomogeneous dielectrics.

本文用二次元求解了非均匀介质填充波导的边值问题。

The superconvergence of triangle quadratic finite element for a class of nonlinear elliptical problems

一类非线性椭圆问题三角形二次元的超收敛性

A note on interpolating correction of the biquadratic finite element in rectangle domain

矩形双二次元插值校正的一点注记

Asymptotic Expansions and Extrapolations for Linear and Quadratic Finite Element Based Common Triangular Meshes

基于几类基本三角形网格下的线性元与二次元的渐进展式和外推研究

2D finite element analysis of bearing capacity of tunnel lining with cracks

带裂纹隧道二次衬砌承载能力的平面有限元计算分析

Scalar Mode Analysis of Optical Fibers by Means of the Finite Quadratic Element Method

有限二次单元法光纤标量模式分析

Numerical experiments show our AMG method is robust and efficient for solving the quadratic Lagrangian finite element system.

数值实验表明这种代数多重网格法对求解二次拉格朗日有限元方程是健壮和有效的。

A Kind of Quadratic Superconvergence Finite Volume Element Method for One Dimensional Elliptic and Parabolic Equations

一维椭圆和抛物方程的超收敛二次有限体积元方法

In this thesis, we mainly study supercloseness of quadratic serendipity block finite element method for three-dimensional variable coefficient elliptic problems.

本文主要研究三维变系数椭圆方程二次奇妙族有限元方法的超逼近。